Skip to content

Drywall Calculator

Calculate drywall — sheets, screws and tape for US drywall installation with waste. Enter drywall dimensions to get instant results. Enter dimensions, select units and add waste to get instant, supplier-ready numbers.

1. Measurements & Dimensions

2. Material Properties & Waste Allowance

3. Optional Material Cost

DRYWALL CALCULATOR ESTIMATE
--

Enter dimensions above to calculate

Calculation Breakdown & StepsFormula: Area = 2 × (length + width) × height + optional ceiling area − openings; sheets = ceil(area × allowance factor / sheet area).
  1. Enter values to see step-by-step substitution.

    Engineering Assumptions:

    • Four walls of a rectangular room; optional flat ceiling. Whole-sheet purchasing estimate, not an optimized cut layout.
    • Enter the sheet size and opening deductions actually used in your plan.
    VISUAL GUIDE — DRYWALL CALCULATORdrywall · drywall-calculator

    TOP VIEW — Length × Width

    Drywall Calculator topLength 12ftWidthDrywall12×17 = 204 ft²

    SECTION — Wall height 8ft

    Drywall Calculator sectionDrywall 8ft8"Area = 2 × (length + width) × height + optional ceiling area − openings; sheets = ceil(area × allowance factor / sheet area). · +10% → 5.54 yd³
    Drywall Calculator — Area = 2 × (length + width) × height + optional ceiling area − openings; sheets = ceil(area × allowance factor / sheet area). · example 12×17 @8ft = 136.0 ft³ (5.04 yd³) → 5.54 yd³ with 10% waste · drywall-calculator

    What Is This Calculator?

    The Drywall Calculator — Covers US interiors — drywall sheets, screws, tape, paint and insulation.

    What Does It Calculate?

    • Sheets (4x8 =32 ft2)
    • Gallons at 350 ft2/gal
    • Insulation batts with waste

    How to Use the Calculator

    1. Measure Room 12x10 ft, height 8 ft — use feet for length/width and inches for thickness where typical.
    2. Enter values and select units. The calculator converts to feet before calculating (inches /12, yards x3).
    3. Adjust waste % and optional price, then click Calculate. Results show with waste included.
    4. Use Reset to clear and try another size.

    Formula & Engineering Methodology

    Area = 2 × (length + width) × height + optional ceiling area − openings; sheets = ceil(area × allowance factor / sheet area).

    • Area — Length x Width in ft2

    All units convert to exact standard engineering dimensions (NIST SP 811) before calculation to ensure consistency between US Customary and Metric measurements.

    Worked Example

    Example: Room 12x10 ft, height 8 ft

    STEPVALUE
    Wall area2x(12x8)+2x(10x8)=352 ft2
    Less openings-21 ft2 door =331 ft2
    Gallons @350 ft2/galceil(331/350)=1

    Construction Information

    Material: Drywall 4x8, screws 28 per sheet, tape 500 ft per roll. Paint 350 ft2/gal, primer 300. Spray foam 1 in = R6.

    • Measure longest x widest; split L-shapes into two rectangles and add.
    • Compact subgrade — soft spots add thickness.
    • For structural sizing (beams, headers, rebar) verify with a professional per local code.

    Material Information

    Drywall 4x8, screws 28 per sheet, tape 500 ft per roll. Paint 350 ft2/gal, primer 300. Spray foam 1 in = R6.

    Waste & Overages

    Add 10% for cuts and openings — 15% for vaulted ceilings.

    Practical Tips

    • Hang drywall perpendicular to joists
    • Prime before paint for true color

    Common Mistakes

    • Not deducting openings — over-order 10%
    • One coat paint — needs two for coverage

    Assumptions & Engineering References

    • Four walls of a rectangular room; optional flat ceiling. Whole-sheet purchasing estimate, not an optimized cut layout.
    • Enter the sheet size and opening deductions actually used in your plan.

    This calculator provides an estimate based on your inputs. Actual requirements vary by site, material and installation. For code-regulated or load-bearing work, consult a qualified professional.

    Calculations run 100% in your browser — zero tracking of your dimensions or input data.

    Related calculators

    Frequently asked questions

    What does the Drywall Calculator calculate?

    The Drywall Calculator estimates drywall quantity for US jobs — Sheets (4x8 =32 ft2), Gallons at 350 ft2/gal, Insulation batts with waste. Enter dimensions, choose units, add waste and price to get instant results.

    How do I measure for drywall?

    Measure room 12x10 ft, height 8 ft on site. Use the unit selectors — the tool converts inches→feet (÷12) and yards→feet (×3) before math. For non-rectangular, split into rectangles and add.

    How much waste should I add?

    Add 10% for cuts and openings — 15% for vaulted ceilings.

    How accurate is this drywall estimate?

    Math is exact for your inputs. Actual needs vary by site, material and installation. Add 5–10% waste for rectangular, 10–15% for irregular.

    About Calculator Street

    Built by Vipul Otari for US homeowners & contractors. Calculator inputs are processed in your browser. Estimates depend on your measurements, product specifications and the assumptions shown on this page. Confirm order quantities with your supplier and structural requirements with your project designer. Page updated: 2026-09-11.

    Free·Fast·Mobile-friendly·US units·Reviewed