Fence Calculator
Calculate fence materials — posts, panels or boards, spacing and waste for US deck & fence projects. Enter dimensions, select units and add waste to get instant, supplier-ready numbers.
Enter dimensions above to calculate
- Enter values to see step-by-step substitution.
Engineering Assumptions:
- One open, continuous run. For multiple disconnected runs, calculate each run separately. A closed loop does not need the extra end post.
- Gate widths must already be deducted from the run. Add only posts not already counted as run endpoints; do not count shared corner or gate posts twice.
- Panel quantity equals sections, and panels must be compatible with the entered spacing. Allowance buys spares; it does not change installed spacing.
Advertisement — after results
Reserved for AdSense — no layout shift.
Fence — posts 8 ft o.c.
What Is This Calculator?
The Fence Calculator — Builds US decks and fences — boards, joists, posts, panels and concrete with waste.
What Does It Calculate?
- Deck boards and joists
- Fence posts, panels and rails
- Concrete bags per post
How to Use the Calculator
- Measure Fence 100 ft, post spacing 8 ft, picket 5.5 in + 0 in gap — use feet for length/width and inches for thickness where typical.
- Enter values and select units. The calculator converts to feet before calculating (inches /12, yards x3).
- Adjust waste % and optional price, then click Calculate. Results show with waste included.
- Use Reset to clear and try another size.
Formula & Engineering Methodology
Sections = ceil(run length / maximum post spacing); posts = sections + 1 + additional posts.
- Length — Fence/deck length
- Spacing — 8 ft post, picket gap 0-0.5 in
All units convert to exact standard engineering dimensions (NIST SP 811) before calculation to ensure consistency between US Customary and Metric measurements.
Worked Example
Example: Fence 100 ft, post spacing 8 ft, picket 5.5 in + 0 in gap
| STEP | VALUE |
|---|---|
| Posts | ceil(100/8)+1 =14 |
| Pickets | 1200 in /5.5 =218 |
| With waste | 236 pickets |
Construction Information
Material: Deck boards 5.5 in + 1/8 in gap, joists 16 in o.c. Fence posts 8 ft spacing, 2.5 ft deep, 0.5 bag 50-lb per post.
Posts 8 ft OC, 1/3 buried below frost line. Gate needs 2 extra posts.
Material Information
Deck boards 5.5 in + 1/8 in gap, joists 16 in o.c. Fence posts 8 ft spacing, 2.5 ft deep, 0.5 bag 50-lb per post.
Waste & Overages
Add 10% for cuts and angles — 15% for curves.
Practical Tips
- Crown deck boards up
- Set posts in gravel + concrete for drainage
Common Mistakes
- Wrong gap — boards buckle
- Shallow posts — frost heave
Assumptions & Engineering References
- One open, continuous run. For multiple disconnected runs, calculate each run separately. A closed loop does not need the extra end post.
- Gate widths must already be deducted from the run. Add only posts not already counted as run endpoints; do not count shared corner or gate posts twice.
- Panel quantity equals sections, and panels must be compatible with the entered spacing. Allowance buys spares; it does not change installed spacing.
This calculator provides an estimate based on your inputs. Actual requirements vary by site, material and installation. For code-regulated or load-bearing work, consult a qualified professional.
Calculations run 100% in your browser — zero tracking of your dimensions or input data.
Related calculators
Deck Calculator
Calculate deck materials — posts, panels or boards, spacing ...
Deck Cost Calculator
Estimate deck cost — material, quantity and price with waste...
Deck Board Calculator
Calculate deck board materials — posts, panels or boards, sp...
Deck Joist Calculator
Calculate deck joist materials — posts, panels or boards, sp...
Deck Footing Calculator
Calculate deck footing materials — posts, panels or boards, ...
Deck Stair Calculator
Calculate deck stair materials — posts, panels or boards, sp...
Frequently asked questions
What does the Fence Calculator calculate?
The Fence Calculator estimates fence quantity for US jobs — Deck boards and joists, Fence posts, panels and rails, Concrete bags per post. Enter dimensions, choose units, add waste and price to get instant results.
How do I measure for fence?
Measure fence 100 ft, post spacing 8 ft, picket 5.5 in + 0 in gap on site. Use the unit selectors — the tool converts inches→feet (÷12) and yards→feet (×3) before math. For non-rectangular, split into rectangles and add.
How much waste should I add?
Add 10% for cuts and angles — 15% for curves.
How accurate is this fence estimate?
Math is exact for your inputs. Actual needs vary by site, material and installation. Add 5–10% waste for rectangular, 10–15% for irregular.
About Calculator Street
Built by Vipul Otari for US homeowners & contractors. Calculator inputs are processed in your browser. Estimates depend on your measurements, product specifications and the assumptions shown on this page. Confirm order quantities with your supplier and structural requirements with your project designer. Page updated: 2026-09-11.