Skip to content

Gravel Weight Calculator

Convert gravel cubic yards to tons and pounds — for ordering by weight. Enter gravel dimensions to get instant results. Enter dimensions, select units and add waste to get instant, supplier-ready numbers.

1. Measurements & Dimensions

2. Material Properties & Waste Allowance

3. Optional Material Cost

GRAVEL WEIGHT CALCULATOR ESTIMATE
--

Enter dimensions above to calculate

Calculation Breakdown & StepsFormula: Mass = volume × density; US tons = pounds / 2,000; kilograms = pounds × 0.45359237.
  1. Enter values to see step-by-step substitution.

    Engineering Assumptions:

    • Depth and density must describe the same state: loose delivered material or the finished compacted layer.
    • Density varies with grading, moisture and compaction. A supplier quote is more reliable than a generic default. Short tons are 2,000 lb.
    VISUAL GUIDE — GRAVEL WEIGHT CALCULATORgravel · gravel-weight-calculator

    TOP VIEW — Volume × Material density

    Gravel Weight Calculator topVolume 19yd3Material densityGravel Weight19×9 = 171 yd3²

    SECTION — Material allowance 3%

    Gravel Weight Calculator sectionGravel Weight 3%3"Mass = volume × density; US tons = pounds / 2,000; kilograms = pounds × 0.45359237. · +7% → 1.69 yd³
    Gravel Weight Calculator — Mass = volume × density; US tons = pounds / 2,000; kilograms = pounds × 0.45359237. · example 19×9 @3% = 42.8 ft³ (1.58 yd³) → 1.69 yd³ with 7% waste · gravel-weight-calculator

    What Is This Calculator?

    The Gravel Weight Calculator — Sizes gravel and aggregate for driveways and patios — volume, weight and cost with density.

    What Does It Calculate?

    • Cubic yards and cubic feet
    • Tons and pounds using 1.35–1.60 t/yd³
    • Cost per ton or per yard with waste

    How to Use the Calculator

    1. Measure Yard 2.47 yd3 pea gravel 1.35 t/yd3 — use feet for length/width and inches for thickness where typical.
    2. Enter values and select units. The calculator converts to feet before calculating (inches /12, yards x3).
    3. Adjust waste % and optional price, then click Calculate. Results show with waste included.
    4. Use Reset to clear and try another size.

    Formula & Engineering Methodology

    Mass = volume × density; US tons = pounds / 2,000; kilograms = pounds × 0.45359237.

    • Volume — Cubic yards with waste
    • Density — Pea 1.35, Crushed 1.40, Limestone 1.60 t/yd3

    All units convert to exact standard engineering dimensions (NIST SP 811) before calculation to ensure consistency between US Customary and Metric measurements.

    Worked Example

    Example: Yard 2.47 yd3 pea gravel 1.35 t/yd3

    STEPVALUE
    Volume2.47 yd3
    Weight2.47*1.35 = 3.33 tons = 6,670 lb
    With waste3.67 tons

    Construction Information

    Material: Pea gravel 1.35 t/yd³, crushed stone 1.40, river rock 1.33, limestone 1.60, sand 1.30. Confirm with scale ticket — moisture adds 10%.

    Pea 1.35, crushed 1.40, limestone 1.60, granite 1.42 t/yd3. Moisture +10%.

    Material Information

    Pea gravel 1.35 t/yd³, crushed stone 1.40, river rock 1.33, limestone 1.60, sand 1.30. Confirm with scale ticket — moisture adds 10%.

    Waste & Overages

    Open-graded stone settles ~8% (×1.10), crusher run compacts 15–25% (×1.20). Add after volume.

    Practical Tips

    • Use fabric under decorative gravel
    • Crown driveway center 2% for drainage

    Common Mistakes

    • Mixing tons and yards without density
    • Not adding compaction for crusher run

    Assumptions & Engineering References

    • Depth and density must describe the same state: loose delivered material or the finished compacted layer.
    • Density varies with grading, moisture and compaction. A supplier quote is more reliable than a generic default. Short tons are 2,000 lb.

    This calculator provides an estimate based on your inputs. Actual requirements vary by site, material and installation. For code-regulated or load-bearing work, consult a qualified professional.

    Calculations run 100% in your browser — zero tracking of your dimensions or input data.

    Related calculators

    Frequently asked questions

    What does the Gravel Weight Calculator calculate?

    The Gravel Weight Calculator estimates gravel weight quantity for US jobs — Cubic yards and cubic feet, Tons and pounds using 1.35–1.60 t/yd³, Cost per ton or per yard with waste. Enter dimensions, choose units, add waste and price to get instant results.

    How do I measure for gravel weight?

    Measure yard 2.47 yd3 pea gravel 1.35 t/yd3 on site. Use the unit selectors — the tool converts inches→feet (÷12) and yards→feet (×3) before math. For non-rectangular, split into rectangles and add.

    How much waste should I add?

    Open-graded stone settles ~8% (×1.10), crusher run compacts 15–25% (×1.20). Add after volume.

    How accurate is this gravel weight estimate?

    Math is exact for your inputs. Actual needs vary by site, material and installation. Add 5–10% waste for rectangular, 10–15% for irregular.

    About Calculator Street

    Built by Vipul Otari for US homeowners & contractors. Calculator inputs are processed in your browser. Estimates depend on your measurements, product specifications and the assumptions shown on this page. Confirm order quantities with your supplier and structural requirements with your project designer. Page updated: 2026-09-11.

    Free·Fast·Mobile-friendly·US units·Reviewed