Skip to content

Landscaping Cost Calculator

Estimate landscaping cost — material, quantity and price with waste. Compare per yard, per bag or per ton for US projects. Enter dimensions, select units and add waste to get instant, supplier-ready numbers.

1. Measurements & Dimensions

2. Material Properties & Waste Allowance

3. Optional Material Cost

LANDSCAPING COST CALCULATOR ESTIMATE
--

Enter dimensions above to calculate

Calculation Breakdown & StepsFormula: Total = quantity × allowance factor × unit price × (1 + material tax / 100) + delivery + labor.
  1. Enter values to see step-by-step substitution.

    Engineering Assumptions:

    • Quantity and quoted unit price must use the same unit. Tax applies to materials only in this model; local treatment of services and delivery may differ.
    • Use a separate calculation for each material line and add the totals.
    VISUAL GUIDE — LANDSCAPING COST CALCULATORlandscaping · landscaping-cost-calculator

    TOP VIEW — Material quantity × Material price (optional)

    Landscaping Cost Calculator topMaterial quantity 19ftMaterial price (optional)Landscaping Cost19×16 = 304 ft²

    SECTION — Delivery charge ($) 8in

    Landscaping Cost Calculator sectionLandscaping Cost 8in8"Total = quantity × allowance factor × unit price × (1 + material tax / 100) + delivery + labor. · +7% → 8.03 yd³
    Landscaping Cost Calculator — Total = quantity × allowance factor × unit price × (1 + material tax / 100) + delivery + labor. · example 19×16 @8in = 202.7 ft³ (7.51 yd³) → 8.03 yd³ with 7% waste · landscaping-cost-calculator

    What Is This Calculator?

    The Landscaping Cost Calculator — Hardscape for US yards — pavers, base, sand, mulch and retaining walls.

    What Does It Calculate?

    • Paver count from area / paver area
    • Base gravel and sand volume
    • Mulch yards vs bags

    How to Use the Calculator

    1. Measure Patio 12x10 ft =120 ft2, paver 12x12 in — use feet for length/width and inches for thickness where typical.
    2. Enter values and select units. The calculator converts to feet before calculating (inches /12, yards x3).
    3. Adjust waste % and optional price, then click Calculate. Results show with waste included.
    4. Use Reset to clear and try another size.

    Formula & Engineering Methodology

    Total = quantity × allowance factor × unit price × (1 + material tax / 100) + delivery + labor.

    • Area — Length*Width ft2
    • Paver area — 12x12=1 ft2, 4x8=0.222 ft2

    All units convert to exact standard engineering dimensions (NIST SP 811) before calculation to ensure consistency between US Customary and Metric measurements.

    Worked Example

    Example: Patio 12x10 ft =120 ft2, paver 12x12 in

    STEPVALUE
    Pavers120/1 =120
    With 10% waste132 pavers
    Base 4 in120*0.333/27 =1.48 yd3

    Construction Information

    Material: Pavers 12x12 in =1 ft2, base 4 in gravel, 1 in sand. Mulch 2 ft3 bag =8 ft2 at 3 in.

    Base 4 in patio, 6-8 in driveway. Sand 1 in screeded. Waste 10% rect, 15% curve.

    Material Information

    Pavers 12x12 in =1 ft2, base 4 in gravel, 1 in sand. Mulch 2 ft3 bag =8 ft2 at 3 in.

    Waste & Overages

    Add 10% for cuts and curves — 15% for radial patterns.

    Practical Tips

    • Compact base in 2 in lifts
    • Edge restraint prevents shift

    Common Mistakes

    • No base — pavers settle
    • Thin mulch — weeds poke through

    Assumptions & Engineering References

    • Quantity and quoted unit price must use the same unit. Tax applies to materials only in this model; local treatment of services and delivery may differ.
    • Use a separate calculation for each material line and add the totals.

    This calculator provides an estimate based on your inputs. Actual requirements vary by site, material and installation. For code-regulated or load-bearing work, consult a qualified professional.

    Calculations run 100% in your browser — zero tracking of your dimensions or input data.

    Related calculators

    Frequently asked questions

    What does the Landscaping Cost Calculator calculate?

    The Landscaping Cost Calculator estimates landscaping cost quantity for US jobs — Paver count from area / paver area, Base gravel and sand volume, Mulch yards vs bags. Enter dimensions, choose units, add waste and price to get instant results.

    How do I measure for landscaping cost?

    Measure patio 12x10 ft =120 ft2, paver 12x12 in on site. Use the unit selectors — the tool converts inches→feet (÷12) and yards→feet (×3) before math. For non-rectangular, split into rectangles and add.

    How much waste should I add?

    Add 10% for cuts and curves — 15% for radial patterns.

    How accurate is this landscaping cost estimate?

    Math is exact for your inputs. Actual needs vary by site, material and installation. Add 5–10% waste for rectangular, 10–15% for irregular.

    About Calculator Street

    Built by Vipul Otari for US homeowners & contractors. Calculator inputs are processed in your browser. Estimates depend on your measurements, product specifications and the assumptions shown on this page. Confirm order quantities with your supplier and structural requirements with your project designer. Page updated: 2026-09-11.

    Free·Fast·Mobile-friendly·US units·Reviewed