Patio Concrete Calculator
Calculate patio concrete volume, bags and weight — cubic yards/feet, 40/60/80-lb bags vs ready-mix, weight and cost with density and waste. Enter dimensions, select units and add waste to get instant, supplier-ready numbers.
Enter dimensions above to calculate
- Enter values to see step-by-step substitution.
Engineering Assumptions:
- Rectangular sections of uniform thickness. Split irregular shapes into non-overlapping rectangles.
- Thickness and reinforcement must come from project plans; volume alone does not establish load capacity.
Advertisement — after results
Reserved for AdSense — no layout shift.
TOP VIEW — Length × Width
SECTION — Placed thickness 8in
What Is This Calculator?
The Patio Concrete Calculator — Sizes slabs and patio concrete for US patios and shed pads — area, thickness, reinforcement and cost.
What Does It Calculate?
- Slab area in square feet
- Concrete volume in cubic yards
- Bags and reinforcement with waste
How to Use the Calculator
- Measure Patio Concrete 20 ft x 10 ft x 4 in — use feet for length/width and inches for thickness where typical.
- Enter values and select units. The calculator converts to feet before calculating (inches /12, yards x3).
- Adjust waste % and optional price, then click Calculate. Results show with waste included.
- Use Reset to clear and try another size.
Formula & Engineering Methodology
V = length × width × thickness × identical sections
- L — Length for Patio Concrete in feet
- W — Width for Patio Concrete in feet
- D — Depth for Patio Concrete in feet
All units convert to exact standard engineering dimensions (NIST SP 811) before calculation to ensure consistency between US Customary and Metric measurements.
Worked Example
Example: Patio Concrete 20 ft x 10 ft x 4 in
| STEP | VALUE |
|---|---|
| Convert depth | 4 in /12 = 0.333 ft |
| Cubic feet | 20 x 10 x 0.333 = 66.67 ft3 |
| Cubic yards | 66.67 /27 = 2.47 yd3 |
| With 10% waste | 2.72 yd3 |
Construction Information
Material: Patio slabs 3.5–4 in thick, 3000–3500 psi. Base 4 in compacted gravel. Use welded wire mesh or rebar for crack control.
- Measure longest x widest; split L-shapes into two rectangles and add.
- Compact subgrade — soft spots add thickness.
- For structural sizing (beams, headers, rebar) verify with a professional per local code.
Material Information
Patio slabs 3.5–4 in thick, 3000–3500 psi. Base 4 in compacted gravel. Use welded wire mesh or rebar for crack control.
Waste & Overages
Add 5–10% for spillage and thickness variation — 10% safe for hand-screeded patios.
Practical Tips
- Slope patio 1/4 in per foot away from house
- Keep joints every 8–10 ft to control cracking
Common Mistakes
- Pouring too thin (under 3.5 in) — cracks and frost heave
- Forgetting slope — water pools against house
Assumptions & Engineering References
- Rectangular sections of uniform thickness. Split irregular shapes into non-overlapping rectangles.
- Thickness and reinforcement must come from project plans; volume alone does not establish load capacity.
This calculator provides an estimate based on your inputs. Actual requirements vary by site, material and installation. For code-regulated or load-bearing work, consult a qualified professional.
Calculations run 100% in your browser — zero tracking of your dimensions or input data.
Related calculators
Slab Thickness Calculator
Calculate slab thickness and volume — for slabs, base and co...
Slab Cost Calculator
Estimate slab cost — material, quantity and price with waste...
Slab Reinforcement Calculator
Calculate slab reinforcement count and spacing — how many pi...
Patio Cost Calculator
Estimate patio cost — material, quantity and price with wast...
Driveway Concrete Calculator
Calculate driveway concrete volume, bags and weight — cubic ...
Driveway Cost Calculator
Estimate driveway cost — material, quantity and price with w...
Frequently asked questions
What does the Patio Concrete Calculator calculate?
The Patio Concrete Calculator estimates patio concrete quantity for US jobs — Slab area in square feet, Concrete volume in cubic yards, Bags and reinforcement with waste. Enter dimensions, choose units, add waste and price to get instant results.
How do I measure for patio concrete?
Measure patio concrete 20 ft x 10 ft x 4 in on site. Use the unit selectors — the tool converts inches→feet (÷12) and yards→feet (×3) before math. For non-rectangular, split into rectangles and add.
How much waste should I add?
Add 5–10% for spillage and thickness variation — 10% safe for hand-screeded patios.
How accurate is this patio concrete estimate?
Math is exact for your inputs. Actual needs vary by site, material and installation. Add 5–10% waste for rectangular, 10–15% for irregular.
About Calculator Street
Built by Vipul Otari for US homeowners & contractors. Calculator inputs are processed in your browser. Estimates depend on your measurements, product specifications and the assumptions shown on this page. Confirm order quantities with your supplier and structural requirements with your project designer. Page updated: 2026-09-11.