Skip to content

Brick Cost Calculator

Estimate brick cost — material, quantity and price with waste. Compare per yard, per bag or per ton for US projects. Enter dimensions, select units and add waste to get instant, supplier-ready numbers.

1. Measurements & Dimensions

2. Material Properties & Waste Allowance

3. Optional Material Cost

BRICK COST CALCULATOR ESTIMATE
--

Enter dimensions above to calculate

Calculation Breakdown & StepsFormula: Total = quantity × allowance factor × unit price × (1 + material tax / 100) + delivery + labor.
  1. Enter values to see step-by-step substitution.

    Engineering Assumptions:

    • Quantity and quoted unit price must use the same unit. Tax applies to materials only in this model; local treatment of services and delivery may differ.
    • Use a separate calculation for each material line and add the totals.
    VISUAL GUIDE — BRICK COST CALCULATORbrick · brick-cost-calculator

    Brick Cost — Material quantity × Material price (optional) · 3/8" joint

    Brick Cost Calculator brickBrick Cost128 ft² → ~870 bricks +5%
    Brick Cost Calculator — Total = quantity × allowance factor × unit price × (1 + material tax / 100) + delivery + labor. · example 16×8 @3in = 32.0 ft³ (1.19 yd³) → 1.24 yd³ with 5% waste · brick-cost-calculator

    What Is This Calculator?

    The Brick Cost Calculator — Counts bricks and masonry units for US walls, patios and veneers — quantity, mortar and cost.

    What Does It Calculate?

    • Bricks or blocks per wall area
    • Mortar volume with 3/8 in joint
    • Waste-adjusted count and cost

    How to Use the Calculator

    1. Measure 1,193 bricks @ $0.65 each — use feet for length/width and inches for thickness where typical.
    2. Enter values and select units. The calculator converts to feet before calculating (inches /12, yards x3).
    3. Adjust waste % and optional price, then click Calculate. Results show with waste included.
    4. Use Reset to clear and try another size.

    Formula & Engineering Methodology

    Total = quantity × allowance factor × unit price × (1 + material tax / 100) + delivery + labor.

    • Qty — Units with waste
    • Price — $ per brick/block

    All units convert to exact standard engineering dimensions (NIST SP 811) before calculation to ensure consistency between US Customary and Metric measurements.

    Worked Example

    Example: 1,193 bricks @ $0.65 each

    STEPVALUE
    Material1,193*0.65 = $775.45
    With waste$814.22

    Construction Information

    Material: Standard brick 7.5x2.25 in, 6.8 per ft2 with 3/8 in joint. Mortar Type S 1:3, Type N 1:4. CMU 16x8 in face (1.125 per ft2).

    Brick $0.50-1.20, CMU $1.20-2.50 in 2026. Mortar extra $8-12/bag.

    Material Information

    Standard brick 7.5x2.25 in, 6.8 per ft2 with 3/8 in joint. Mortar Type S 1:3, Type N 1:4. CMU 16x8 in face (1.125 per ft2).

    Waste & Overages

    Add 7% for cuts and breakage — 10% for arches or curves.

    Practical Tips

    • Dry-lay a course to check bond
    • Keep mortar workable — do not retemper after initial set

    Common Mistakes

    • Forgetting joint thickness — count off 15%
    • Not adding waste for cuts around openings

    Assumptions & Engineering References

    • Quantity and quoted unit price must use the same unit. Tax applies to materials only in this model; local treatment of services and delivery may differ.
    • Use a separate calculation for each material line and add the totals.

    This calculator provides an estimate based on your inputs. Actual requirements vary by site, material and installation. For code-regulated or load-bearing work, consult a qualified professional.

    Calculations run 100% in your browser — zero tracking of your dimensions or input data.

    Related calculators

    Frequently asked questions

    What does the Brick Cost Calculator calculate?

    The Brick Cost Calculator estimates brick cost quantity for US jobs — Bricks or blocks per wall area, Mortar volume with 3/8 in joint, Waste-adjusted count and cost. Enter dimensions, choose units, add waste and price to get instant results.

    How do I measure for brick cost?

    Measure 1,193 bricks @ $0.65 each on site. Use the unit selectors — the tool converts inches→feet (÷12) and yards→feet (×3) before math. For non-rectangular, split into rectangles and add.

    How much waste should I add?

    Add 7% for cuts and breakage — 10% for arches or curves.

    How accurate is this brick cost estimate?

    Math is exact for your inputs. Actual needs vary by site, material and installation. Add 5–10% waste for rectangular, 10–15% for irregular.

    About Calculator Street

    Built by Vipul Otari for US homeowners & contractors. Calculator inputs are processed in your browser. Estimates depend on your measurements, product specifications and the assumptions shown on this page. Confirm order quantities with your supplier and structural requirements with your project designer. Page updated: 2026-09-11.

    Free·Fast·Mobile-friendly·US units·Reviewed