Skip to content

Brick Mortar Calculator

Calculate brick mortar — units per wall area with mortar joint, cost with waste. Enter brick dimensions to get instant results. Enter dimensions, select units and add waste to get instant, supplier-ready numbers.

1. Measurements & Dimensions

2. Material Properties & Waste Allowance

3. Optional Material Cost

BRICK MORTAR CALCULATOR ESTIMATE
--

Enter dimensions above to calculate

Calculation Breakdown & StepsFormula: Mortar volume ≈ net wall area × bedding depth × (1 − actual brick face / installed module face).
  1. Enter values to see step-by-step substitution.

    Engineering Assumptions:

    • Geometric estimate for full-bed, single-wythe brickwork, including bed and head joints. Frogs, perforations and site losses affect actual yield.
    • Do not apply solid brick bedding geometry to hollow CMU face-shell bedding.
    VISUAL GUIDE — BRICK MORTAR CALCULATORbrick · brick-mortar-calculator

    Brick Mortar — Wall length × Wall height · 3/8" joint

    Brick Mortar Calculator brickBrick Mortar156 ft² → ~1061 bricks +5%
    Brick Mortar Calculator — Mortar volume ≈ net wall area × bedding depth × (1 − actual brick face / installed module face). · example 12×13 @3ft2 = 39.0 ft³ (1.44 yd³) → 1.52 yd³ with 5% waste · brick-mortar-calculator

    What Is This Calculator?

    The Brick Mortar Calculator — Counts bricks and masonry units for US walls, patios and veneers — quantity, mortar and cost.

    What Does It Calculate?

    • Bricks or blocks per wall area
    • Mortar volume with 3/8 in joint
    • Waste-adjusted count and cost

    How to Use the Calculator

    1. Measure Wall 20 ft x 8 ft, brick 7.5x2.25 in, joint 0.375 in — use feet for length/width and inches for thickness where typical.
    2. Enter values and select units. The calculator converts to feet before calculating (inches /12, yards x3).
    3. Adjust waste % and optional price, then click Calculate. Results show with waste included.
    4. Use Reset to clear and try another size.

    Formula & Engineering Methodology

    Mortar volume ≈ net wall area × bedding depth × (1 − actual brick face / installed module face).

    • Wall area — Length x Height in ft2
    • Brick area — (Brick L + joint) x (Brick H + joint)

    All units convert to exact standard engineering dimensions (NIST SP 811) before calculation to ensure consistency between US Customary and Metric measurements.

    Worked Example

    Example: Wall 20 ft x 8 ft, brick 7.5x2.25 in, joint 0.375 in

    STEPVALUE
    Wall area160 ft2 = 23,040 in2
    Brick + joint7.875x2.625 = 20.67 in2
    Bricksceil(23,040/20.67)=1,115
    With 7% waste1,193

    Construction Information

    Material: Standard brick 7.5x2.25 in, 6.8 per ft2 with 3/8 in joint. Mortar Type S 1:3, Type N 1:4. CMU 16x8 in face (1.125 per ft2).

    • Measure longest x widest; split L-shapes into two rectangles and add.
    • Compact subgrade — soft spots add thickness.
    • For structural sizing (beams, headers, rebar) verify with a professional per local code.

    Material Information

    Standard brick 7.5x2.25 in, 6.8 per ft2 with 3/8 in joint. Mortar Type S 1:3, Type N 1:4. CMU 16x8 in face (1.125 per ft2).

    Waste & Overages

    Add 7% for cuts and breakage — 10% for arches or curves.

    Practical Tips

    • Dry-lay a course to check bond
    • Keep mortar workable — do not retemper after initial set

    Common Mistakes

    • Forgetting joint thickness — count off 15%
    • Not adding waste for cuts around openings

    Assumptions & Engineering References

    • Geometric estimate for full-bed, single-wythe brickwork, including bed and head joints. Frogs, perforations and site losses affect actual yield.
    • Do not apply solid brick bedding geometry to hollow CMU face-shell bedding.

    This calculator provides an estimate based on your inputs. Actual requirements vary by site, material and installation. For code-regulated or load-bearing work, consult a qualified professional.

    Calculations run 100% in your browser — zero tracking of your dimensions or input data.

    Related calculators

    Frequently asked questions

    What does the Brick Mortar Calculator calculate?

    The Brick Mortar Calculator estimates brick mortar quantity for US jobs — Bricks or blocks per wall area, Mortar volume with 3/8 in joint, Waste-adjusted count and cost. Enter dimensions, choose units, add waste and price to get instant results.

    How do I measure for brick mortar?

    Measure wall 20 ft x 8 ft, brick 7.5x2.25 in, joint 0.375 in on site. Use the unit selectors — the tool converts inches→feet (÷12) and yards→feet (×3) before math. For non-rectangular, split into rectangles and add.

    How much waste should I add?

    Add 7% for cuts and breakage — 10% for arches or curves.

    How accurate is this brick mortar estimate?

    Math is exact for your inputs. Actual needs vary by site, material and installation. Add 5–10% waste for rectangular, 10–15% for irregular.

    About Calculator Street

    Built by Vipul Otari for US homeowners & contractors. Calculator inputs are processed in your browser. Estimates depend on your measurements, product specifications and the assumptions shown on this page. Confirm order quantities with your supplier and structural requirements with your project designer. Page updated: 2026-09-11.

    Free·Fast·Mobile-friendly·US units·Reviewed