Skip to content

Paint Coverage Calculator

Calculate paint coverage — gallons, coats and containers for US interior and exterior painting — for drywall projects. Enter dimensions, select units and add waste to get instant, supplier-ready numbers.

1. Measurements & Dimensions

PAINT COVERAGE CALCULATOR ESTIMATE
--

Enter dimensions above to calculate

Calculation Breakdown & StepsFormula: Surface coverage = available paint × product coverage / coats.
  1. Enter values to see step-by-step substitution.

    Engineering Assumptions:

    • The result is one surface receiving all entered coats. Texture, absorption and application loss reduce real coverage.
    VISUAL GUIDE — PAINT COVERAGE CALCULATORdrywall · paint-coverage-calculator

    TOP VIEW — Available paint (US gal) × Product coverage (ft²/US gal/coat)

    Paint Coverage Calculator topAvailable paint (US gal) 16ftProduct coverage (ft²/US gal/coat)Paint Coverage16×13 = 208 ft²

    SECTION — Number of coats 3in

    Paint Coverage Calculator sectionPaint Coverage 3in3"Surface coverage = available paint × product coverage / coats. · +5% → 2.02 yd³
    Paint Coverage Calculator — Surface coverage = available paint × product coverage / coats. · example 16×13 @3in = 52.0 ft³ (1.93 yd³) → 2.02 yd³ with 5% waste · paint-coverage-calculator

    What Is This Calculator?

    The Paint Coverage Calculator — Estimates paint coverage for US interiors and exteriors — gallons, coats and containers from area and coverage.

    What Does It Calculate?

    • Net wall/ceiling area
    • Paint gallons with coats
    • Containers (ceil)
    • Cost with waste

    How to Use the Calculator

    1. Measure 331 ft2 walls, 350 ft2/gal — use feet for length/width and inches for thickness where typical.
    2. Enter values and select units. The calculator converts to feet before calculating (inches /12, yards x3).
    3. Adjust waste % and optional price, then click Calculate. Results show with waste included.
    4. Use Reset to clear and try another size.

    Formula & Engineering Methodology

    Surface coverage = available paint × product coverage / coats.

    • Area — Wall area ft2
    • Coverage — 350 ft2/gal paint, 300 primer

    All units convert to exact standard engineering dimensions (NIST SP 811) before calculation to ensure consistency between US Customary and Metric measurements.

    Worked Example

    Example: 331 ft2 walls, 350 ft2/gal

    STEPVALUE
    Coats331*2 coats =662 ft2
    Gallons662/350 =1.89 ->2 gal

    Construction Information

    Material: Drywall 4x8, screws 28 per sheet, tape 500 ft per roll. Paint 350 ft2/gal, primer 300. Spray foam 1 in = R6.

    Paint 350 ft2/gal, primer 300. Two coats always, dark colors may need 3.

    Material Information

    Drywall 4x8, screws 28 per sheet, tape 500 ft per roll. Paint 350 ft2/gal, primer 300. Spray foam 1 in = R6.

    Waste & Overages

    Add 10% for cuts and openings — 15% for vaulted ceilings.

    Practical Tips

    • Hang drywall perpendicular to joists
    • Prime before paint for true color

    Common Mistakes

    • Not deducting openings — over-order 10%
    • One coat paint — needs two for coverage

    Assumptions & Engineering References

    • The result is one surface receiving all entered coats. Texture, absorption and application loss reduce real coverage.

    This calculator provides an estimate based on your inputs. Actual requirements vary by site, material and installation. For code-regulated or load-bearing work, consult a qualified professional.

    Calculations run 100% in your browser — zero tracking of your dimensions or input data.

    Related calculators

    Frequently asked questions

    What does the Paint Coverage Calculator calculate?

    The Paint Coverage Calculator estimates paint coverage quantity for US jobs — Sheets (4x8 =32 ft2), Gallons at 350 ft2/gal, Insulation batts with waste. Enter dimensions, choose units, add waste and price to get instant results.

    How do I measure for paint coverage?

    Measure 331 ft2 walls, 350 ft2/gal on site. Use the unit selectors — the tool converts inches→feet (÷12) and yards→feet (×3) before math. For non-rectangular, split into rectangles and add.

    How much waste should I add?

    Add 10% for cuts and openings — 15% for vaulted ceilings.

    How accurate is this paint coverage estimate?

    Math is exact for your inputs. Actual needs vary by site, material and installation. Add 5–10% waste for rectangular, 10–15% for irregular.

    About Calculator Street

    Built by Vipul Otari for US homeowners & contractors. Calculator inputs are processed in your browser. Estimates depend on your measurements, product specifications and the assumptions shown on this page. Confirm order quantities with your supplier and structural requirements with your project designer. Page updated: 2026-09-11.

    Free·Fast·Mobile-friendly·US units·Reviewed